-
Rippeon Equipment Co.
A division of Gaithersburg Farmers Supply, Inc.
700 East Diamond Ave. Gaithersburg, MD 20877 | PH: 301-670-9300 | Map & Hours

Features
STEERTEK Precision Drive
Get the right fit fast with our completely adjustable steering arm for complete control.
19 Position Foot-Assist Deck Lift
Can be used 'on -the-fly' to lift deck over stumps or other objects.
New Low Profile Caster Covers
Taller caster bearings feature flat caps.
Patented Side Impact Absorber
Dual deck support shocks that minimize damage to your deck due to side impacts to homes, planters, fences or curbs. Rigid when it needs to be, flexible when it has to be.
ArmorTek5 BadBoyMowerDeck
With adjustable front leading edge, 5.5" depth and baffling system to create more lift for greater discharge and cleaner cut, it blows all other decks away.
Heavy-Duty Actuator Bars
Our actuator bars are spaced farther front and back for far more rigid support across the deck - edge to edge and back to back.
Swing-Away Design Access
Quick and easy access to virtually every serviceable part of the Outlaw makes this patented feature an open and shut case for Bad Boy Mowers. Both tanks swing open for complete access to the entire mower.
New Tie-Down Slots
Cut in the back panel, slots allow tie down hooks to lock mower down in transport.
Pick Your Power
The Outlaw is driven by the robust ZT4400 Hydro-Gear® powertrain, that provides more than enough power for the professional with heavy-duty gears and shaft system.
Dual Fuel Tanks
Hold a total of 13.8 Gallons of fuel for all-day, non-stop operation.
Full Width Seat Release Bar
Get to the heart of your Bad Boy with an easy tug - and from either side.
Specifications
Mower Specifications | |
Cutting Width | 5400 - 54"; 6100 - 61" |
Cutting Height | 1" - 5.5" with Deck Height Control System |
Blades | 5400 - 1/4" x 2 1/2" x 18 3/4", High Lift, Heat Treated 6100 - 1/4" x 2 1/2" x 21", High Lift, Heat Treated |
Lift and Height Adjustment | Foot-Assist Manual Deck Lift |
Blade Belt | Single V-Belt Spring Tension |
Anti-Scalp Rollers | 6 Total (4 Front, 2 Rear) |
Deck Flotation | Floats On Four 1/4" Deck Hangers |
Deck Thickness | 1/4" Thick Solid Steel |
Engine Specifications | |
Gross Horsepower/cc | 747cc Air-Cooled Kohler Confidant |
Cylinders | V-Twin |
Displacement | 747 cc |
Maximum Torque | 42.4 ft. lbs. @ 2,600 RPM |
Fuel Requirement | Unleaded Gasoline (87 Octane or higher) |
Fuel Capacity | 13.8 Gallons |
Fuel Filter | Replaceable Automotive Type |
Cooling System | Air-Cooled |
Ignition | Electronic |
Starter | 12 Volt |
Charging System | 20 Amp |
Drive System Specifications | |
Transmission | Industrial Grade Dual Integrated Hydrostatic Transaxle |
Pump Drive | Integrated Axial Piston Pump & Motor w/Planetary Gear Reduction |
Wheel Drive | Hydro-Gear Integrated 4400 Series Transaxle |
Hydrostatic System Oil | 20W50 Motor Oil |
Hydraulic Filter | Internal, Replaceable, 1 Per Axle |
Pumps (2) | Hydro-Gear 12cc Pump |
Hydraulic Coolers (2) | 9" 3,600RPM Cooling Fan; One per unit |
Mower Dimensions | |
Weight | 5400 - 1,180 lbs.; 6100 - 1,230 lbs. |
Overall Height | 48" |
Overall Width Chute Up/Chute Down |
5400 - 59" / 71"; 6100 - 64 1/2" / 74" |
Overall Length | 86" |
Tire to Tire Width | 5400 - 54 3/4"; 6100 - 56" |
Tires - Front | 13 x 6.5 - 6 Smooth Tread |
Tires - Rear | 24 x 12 - 12 Turf Tread |
Steering | Dual Lever Steering, Independent Control |
Turning Radius | Zero Turn - Zero Degrees, Turns Within Unit Length |
Ground Speed (forward) | Up To 11 mph |
Parking Brake | Internal Wet Disk |