-
Rippeon Equipment Co.
A division of Gaithersburg Farmers Supply, Inc.
700 East Diamond Ave. Gaithersburg, MD 20877 | PH: 301-670-9300 | Map & Hours

Features
Smoother Steering For Better Control
Our steering arm housings provide firmer, tighter and more precise control.
Deck Dial Easy Height System
Foot-assist deck lift pedal for manual deck operation, allowing you to lock-in deck height (up to 4.5") by pushing pedal and simply twisting knob. Deck locks for perfect cut every time.
Easier access
The floorboard of the MZ Magnum lifts up for all-access to the belts for cleaning and servicing. Features a heavy-duty rubber floor mat to protect deck surface and provide no-slip on and off access.
Wider Stance And Lower Center Of Gravity
You'll notice the better traction and performance—even on slopes—right from the start.
Larger Fuel Tanks
The MZ Magnum features more fuel capacity than previous models and allows for more molded in storage.
Deeper Storage
Re-designed for more storage volume without decreasing fuel capacity, plus a built-in cup-holder for your favorite beverage.
Curved Front Rail
Creates an even stronger frame. Taller caster bearings feature flat caps. Also allows you to maximize trailer space.
Fully Fabricated And Welded, Heavy-Duty Deck
Heaviest 7-Gauge formed and welded solid steel deck in its class. Features an additional 1/4" steel reinforcement edge.
Specifications
Mower Specifications | |
Cutting Width | 4800 - 48"; 5400 - 54"; |
Cutting Height | 1.5" – 4.5" with Deck Height Control System |
Blades | 4800 - 7/32" x 2 1/2" x 16 1/2", High Lift, Heat Treated 5400 - 7/32" x 2 1/2" x 18 1/2", High Lift, Heat Treated |
Lift and Height Adjustment | Foot-Assist Lift Electric Lift Optional: Deck Dial |
Blade Belt | Single V-Belt Spring Tension |
Anti-Scalp Rollers | 2 Front |
Deck Flotation | Floats On Four 1/4" Deck Hangers |
Deck Thickness | 3/16" Thick Solid Steel |
Engine Specifications | |
Gross Horsepower/cc | 726cc Kawasaki FR651 |
Cylinders | 90 Degree V-Twin |
Displacement | 726cc |
Maximum Torque | 40 ft. lbs. @ 2,600 RPM |
Fuel Requirement | Unleaded Gasoline (87 Octane or Higher) |
Fuel Capacity | 5 Gallons |
Fuel Filter | Replaceable Automotive Type |
Cooling System | Air-Cooled |
Ignition | Electronic |
Starter | 12 Volt |
Charging System | 16 Amp |
Drive System Specifications | |
Transmission | Dual Integrated Hydrostatic Transaxle |
Pump Drive | Integrated Axial Piston Pump & Motoro w/Gear Reduction |
Wheel Drive | Integrated with Gear Reduction |
Hydrostatic System Oil | 20W50 Motor Oil |
Hydraulic Filter | - |
Pumps (2) | EZT Integrated Unit |
Hydraulic Coolers (2) | 7" Cooling Fan per Unit |
Mower Dimensions | |
Weight | 4800 - 661 lbs.; 5400 - 686 lbs.; |
Overall Height | 42" |
Overall Width Chute Up/Chute Down |
4800 - 54" / 61"; 5400 - 58" / 67" |
Overall Length | 76" |
Tire to Tire Width | 46" |
Tires - Front | 11 x 6.0 – 5 Smooth Tread |
Tires - Rear | 18 x 9.5 - 8 Turf Tread |
Steering | Dual Lever Steering, Independent Control |
Turning Radius | Zero Turn - Zero Degrees, Turns Within Unit Length |
Ground Speed (forward) | Up To 6 mph |
Parking Brake | External Cogg Brake |